Having trouble to set up eero 6 Plus router? The effective and easy solutions underlying in this article will help you out to get through eero 6 Plus setup by eliminating the obstacle that’s stopping the setup process. Make sure that you are applying the fixes listed here appropriately so that you can easily get rid of the issue. Let’s get started.
Eero 6 Plus Router Setup Failed: Try This
This is for your general information that the solutions provided here will work for any model of eero router. Also, you can rely on the same solutions even if you own router from any other brand. Follow these now:
-
Make Connection to the Modem Properly
The router connected to the internet modem during the setup process. If the setup fails then the very first thing you should check is the modem to router connection.
You should ensure that you are using the same Ethernet cable that came in the package with the eero router. The cable should be properly inserted in to both devices. Also check that the ports in use are the right ones. Know that you should use WAN/Internet port on the modem and Internet port on the router to form the connection between the two devices.
-
Reboot the Devices
In case you still fail in Eero WiFi mesh setup then you should reboot the devices. If the modem has a Power button, then press it to turn it off. Take the power cable out of the wall socket.
Do the same with the eero 6 plus router. Unplug it and let the devices sit in this state for some time. Do not forget to take out the Ethernet cable joining the devices.
After a while re-insert the Ethernet cable. Plug in the modem first and apply power. After that plug the router to turn it on. Once the devices are booted up see if the eero router setup happens or not.
-
Supply Adequate Power
Perhaps one of the two devices is not fully booted up. One reason for this could be faulty power outlet in use. You can try using different power outlets to plug in and supply power to the devices. In case there is no other outlet available then take help of an extension cord.
Another reason for inadequate power is loose or damaged power adapter. Check the same and fix or replace the Power adapter and then see if you can setup eero router or not.
In the End
We expect that by applying the solutions given in this post you should complete eero 6 plus setup without getting stuck. If you are struggling and can’t complete the configuration of your router then perform its factory reset. Use the Reset button available on it to reset it.
Before resetting, detach it from the modem. Press the button until the LED flashed in red color. Release the button. This restores the factory settings on the router. Now you can carry out its setup process once again. You should get through the task without failure.