Are you unable to connect to TP-Link repeater WiFi network? Well, that means no internet. This is one of the most common yet major problems that every TP-Link repeater user bumps into. But you need not to worry! We’ve got you covered! In this post, we assure you that we will help you overcome this annoying issue in no time. Once the problem resolves you can easily access the TP-Link repeater login page. Let’s hit the nail on the head!

1. Power Cycle Your TP-Link Repeater

Yes, you read it right! Sometimes, a simple reboot, restart or power cycle is enough to get issues with your TP-Link WiFi range repeater fixed. To initiate the process, follow the step-by-step instructions listed below:

Step 1: Unplug your TP-Link WiFi repeater and wait for some time.

Step 2: Thereafter, plug your TP-Link repeater back in.

Step 3: Ensure to choose a wall socket for your TP-Link repeater that is near to your existing router.

Step 4: After plugging in your TP-Link repeater, wait for the power LED to become stable.

Once done, try connecting your device to the TP-Link repeater’s network and see whether the issue is now fixed.

2. Ensure that the Password of the WiFi Network is Correct

Bear in mind that you can only connect to the TP-Link repeater’s WiFi network only if you are using the correct password (network key or passphrase). So, we recommend you enter the password correctly in order to fix the “unable to connect to TP-Link repeater WiFi network” issue. If you are using the correct password and still not able to use the internet, then possibility that there might be an issue with your TP-Link repeater.

To resolve this issue, make sure that your TP-Link repeater isn’t catching signal interference from neighboring WiFi devices. For this, you have to place your TP-Link repeater away from corners, doors, and windows. Moreover, ensure to place your TP-Link repeater outside the cabinet and above the table.

If the “unable to connect to TP-Link repeater WiFi network” issue continues to appear, then reset your device.

3. Update the Firmware of Your TP-Link Repeater

Verify whether you are using an upgraded version of firmware on your TP-Link repeater or not. On the off chance if you are using an old or outdated version of firmware on your TP-Link repeater, you will surely experience this issue. Therefore, to get rid of it, it is very important to update the firmware of your TP-Link WiFi repeater (whenever available). You can easily update the firmware by navigating to its web-based setup page via tplinkrepeater.net or 192.168. 0.254 IP.

How to Reset Your TP-Link WiFi Range Repeater?

Here’s how to reset the TP-Link repeater:

• Right off the bat, ensure to provide a steady and fluctuation-free power supply to your TP-Link repeater.
• Make sure to disconnect your TP-Link repeater from all the connected devices.
• Then, you have to locate the reset hole on your TP-Link WiFi range repeater.
• After that, grab a pin, paper clip, or any similar object and insert it carefully into the TP-Link repeater reset hole.
• Hold the reset hole for a few seconds and then release it.
• That’s it! Now, you have to perform the TP-Link repeater setup process again after the reset process.

Bonus Tip: Access the repeater’s dashboard via 192.168. 0.254 IP and make sure that your TP-Link repeater’s settings are properly configured.

Endnote

These were the fixes that you can apply in order to fix the “unable to connect to TP-Link repeater WiFi network” issue. Thank you for reading the post.