During the Netgear Nighthawk setup without app setup process, is your router acting adamant and refusing to connect to the modem and the client device? Well, there could be a few reasons why this is happening. To name a few, too much distance between devices, a damaged Ethernet cable, and technical glitches might be the factors contributing to the issue in discussion. However, there is good news.
In case there are reasons behind the issue, so are the solutions. We have penned them down in this article. You can follow them one by one and understand how to install the networking device easily after ensuring that it connects to the modem and the laptop. Taking this into consideration, continue reading.
How to Connect Nighthawk Router to Modem and Laptop?
-
Reduce the Unwanted Space
The troubleshooting process can be commenced with a simple attempt from your end, i.e. reducing the distance between the networking devices. Whether the distance between the router and modem or router and laptop is too much, reduce it. In the first case, the flow of connection might not be happening seamlessly and in the second case, the laptop might be finding it hard to discover the name of the router, let alone connect to it.
Thus, do as suggested and check in case the issue at hand has been fixed for you or not. In case, struggling with it is still your fate, then you should read the following solution. Just because one tip was not helpful does not mean the others will turn out to be useless too.
-
Do Not Use a Damaged Cable
Have a thorough check of the Ethernet cable that is connecting the Netgear Orbi router, existing modem, and laptop. Is it damaged or perhaps the connection is loose? There could also be a possibility that both things are true. Whatever the case might be, it is recommended that you do not use a damaged cable to connect the networking devices. Once you have replaced it with a new one, make the connection finger-tight.
To ensure that you haven’t left it loose, you ought to hear the click sound once the cable has been connected to the ports. Do you hear it? If yes, then the connection is tight. You can pat yourself on the back and feel proud of this little accomplishment.
-
Restart the Nighthawk Router
The last attempt that can be made from your end is to restart the Netgear Nighthawk router. To give it a fresh start, restart the router. Though this will work for you, by any chance, if it refuses to, then you ought to restart the modem as well as the laptop. This entire process is called power cycling the network. It has been proven to be one of the best ways through which issues similar to the one at hand can be fixed.
Now that you have made all three attempts to resolve the issue at hand, see in case you can make the devices connect. In case you are still facing the same issue, then you should try to access the nighthawk-app.com website for the process.
The Conclusion
As mentioned in the introduction of this article, in case your Nighthawk router is just not in the state to join the modem or the laptop because of some reasons, then you do not have to worry as the solutions to troubleshoot the issue are also in existence. We think that with the aid of the ones you just read, you will face zero problems to make your router join the network as well as the client device.
In case this article according to you was a great read, then you should not shy away from having a word about it with others who are experiencing the same to read it too. You might not understand the importance of this instantly, but once you do, you won’t be able to stop yourself from accepting that what is done is the right thing.