Struggling with red light issue on Wavlink extender has become very common these days. It could be due to improper Wavlink WiFi extender setup – no connection between the extender and router – poor internet connectivity – bad placement of the extender, and so on.
But, you don’t have to worry! The reason is – you are on the right post – and you must thanks Google for redirecting you here. In this piece of writing – you will get the topmost troubleshooting hacks following which dealing with the issue will be a walk in the park for you. Let’s get started!
[Fixed] Wavlink Extender Red Light
To do away with the red light issue, apply these hacks:
Restart Your Wavlink Extender
Start troubleshooting the issue by restarting your Wavlink extender. The reason is – technical glitches. Yes, that’s true! And, that is the reason causing the issue in discussion. So, follow the steps outlined underneath and know how to restart the Wavlink device:
- Unplug the extender.
If you have connected your Wavlink extender to other devices in your home, disconnect them as well.
- Wait for 10 minutes.
- Plug in back the extender.
- Wait till the Wavlink device’s LED turns solid green.
- Reconnect the extender from the disconnected devices.
Connect Wavlink Extender to Router
If you are still struggling with the red light issue even after restarting your Wavlink device – then ensure that you have connected it to your host router. If your router has the WPS button, press the WPS button on it – wait for 2 minutes, and press the WPS button on your Wavlink extender.
But, if your router doesn’t have the WPS button – then you can connect them manually – by logging in to your extender via ap.setup – and configuring the settings as per the settings of your host router.
Check Your Internet Connection
If you have poor or no internet – remember that – it is the biggest reason causing the red light issue. So, contact your ISP – and see if he helps you fixing the red light issue by providing your good internet speed.
Change the Wavlink Extender Location
What happened? All the fixes listed above failed to help you? If so, then you can try changing the location of your Wavlink device. But, do not place the Wavlink device away from your router. If possible, relocate the router as per the location of your range extender.
Reset and Reconfigure Wavlink Extender
You have not done the Wavlink WiFi extender setup in a proper way – and this could be the reason causing the red light issue. Don’t worry! We are here to help! Just reset your Wavlink extender by:
- Pressing the reset button on it using a toothpick or paper clip
- Holding it up for 8-10 seconds
- Releasing it and performing Wavlink WiFi extender setup from scratch
Update Firmware
No luck? If so, then to improve the performance of your Wavlink device and to fix red light issue with it, we suggest you update the firmware of your WiFi range extender to the latest version. Updating your extender’s firmware to the latest version offers it users bugs fixing – improved internet speed, outstanding performance and functionality, and more.
So, what we suggest – to make the most out of your Wavlink device, we suggest you update its firmware on a regular basis.
The Last Words
We hope that this article will help you fix Wavlink extender red light issue. If yes, then you can now thank Google for putting you on this particular article. Now that the red light issue is fixed – connect all the devices in your home to the Wavlink extender’s WiFi network –roam around freely in your home – stream videos and movies – without getting any fear of signal drop.