If you are struggling with DLink extender orange light issue, then it means poor connection between it and your router or you haven’t done DLink extender setup process in a proper manner. Not to worry because we are here to help you. There are a few hacks that you can try in order to overcome with the issue in discussion in a snap. Let’s get started!
How to Fix DLink Extender Orange Light Issue?
Here are the fixes that you can try to fix the issue in discussion.
Restart Your DLink Extender
To overcome with orange light and to make the most out of your DLink extender, restart it.
The instructions that will help you restart your extender are as follows:
-
Unplug your DLink extender from its respective power source.
-
And, if you have disconnected your router and the extender – disconnect them as well.
-
Wait for 5-10 minutes after unplugging the DLink device and disconnecting it from your router.
-
Plug in back your DLink extender again.
-
Upon plugging it back, the power LED will start blinking green. Kindly wait will the LED gets stable.
Connect DLink WiFi Extender and Router
Are you still struggling with DLink extender orange light issue? If yes, then it means poor connection is made between your host router and the DLink device or there is no connection at all. No worries! Take an Ethernet cable and connect your devices firmly. But, the cable you choose must be well-working and most importantly – it must be inserted firmly in the correct ports of your DLink extender and router.
“What if I don’t have an Ethernet cable?”
If you don’t have the Ethernet cable – then you can connect them using WPS method. But, the important thing is – your router must be WPS-capable. If it is, press the WPS button on your host router and within 2 minutes, press the WPS button on your DLink extender.
And, if your router doesn’t have WPS button on it – kindly have an Ethernet cable and connect them. Regardless of you go out in the market to purchase a new one.
Change Your DLink Extender Location
Are you still struggling with DLink extender orange light issue? If yes, it means bad placement is hampering its performance. No worries! You don’t have to do much or apply brainteaser yet difficult steps. Just move your extender to another location and see if it works. But, hold on! The new location of your range extender must not be away from your router. And, if possible – try relocating your router as well.
Update DLink Extender Firmware
Outdated firmware also leads to the orange light issue. For getting it fixed, you need to log in to the extender using dlinkap.local, and update the firmware of your DLink device. Make sure – while updating DLink exender’s firmware – you do not interrupt the process by:
-
Turning off the extender
-
Disconnecting it from your host router
-
Refreshing the web page
-
Going online
-
Opening another tab
-
Hitting the back button
Keep in mind – your DLink WiFi extender will restart automatically once the firmware update process gets completed.
Reset and Reconfigure DLink Extender
Are you still struggling with the same issue? If you nod in yes, it means that you haven’t performed DLink extender setup process the way it has to be. But, it seems like the extender setup process is not performed in a proper way or left incomplete. So, what you have to do – reset your DLink extender and configure it from scratch.
For complete and hassle-free DLink extender setup instructions – you may refer to the term highlighted in the first paragraph.
Verdict
Anticipating that the troubleshooting hacks highlighted here were helpful? If yes, then with the hope of helping you – we are wrapping up our article on how to fix DLink extender orange light issue.