Many users who own Wavlink wireless range extenders have been complaining about facing the Wavlink WiFi range extender not turning on issue these days. In case you are also one of them, then it is recommended that you pay attention to the troubleshooting tips mentioned in this article. They will help you to troubleshoot the issue at hand and perform Wavlink setup using the default web address with ease. Given this, keep reading.
[Fixed] Wavlink WiFi Range Extender Not Turning On Issue
1. Check the Power Socket
The primary reason behind the Wavlink WiFi range extender not turning on issue is that the wall socket to which your wireless extender is connected is damaged. This is stopping the electricity from reaching your networking device thereby preventing it from turning on and letting you access the internet after setting it up. Therefore, call an electrician at your home and ask him to repair the wall socket. In case this does not bear fruit for you, it is recommended that you plug your device into another wall socket. In case, this does not help you out either, then walk through the next hack in line.
2. Press the Power Button
Have you considered the possibility that one of the reasons behind the Wavlink WiFi range extender not turning on issue is that you did not press the Power button located on the networking device? No? Well then, you ought to do now. Taking this into consideration, it is suggested that you press the power button on the wireless extender, and wait for some time. The power LED light will soon turn green. By any chance, if it does not, then it means that you did not give enough time to the device to power up properly. Thus, repeat these steps again and see if your Wavlink wireless range extender is able to turn on.
3. Replace the Power Cable
Chances are that the power cable connecting the Wavlink wireless range extender to the wall socket is worn out due to which even if the electricity wants to reach the device, it is not able to, thereby becoming the third reason behind the Wavlink WiFi range extender not turning on issue. In view of this, you need to use a new power cable to connect the wall socket to the extender. Apart from this, make sure that the cable is tightly connected. Otherwise, no matter what you do, you will not be able to resolve the Wavlink WiFi range extender not turning on issue anytime sooner.
4. Reboot the WiFi Extender
Technical glitches can also stop your networking device from turning on. To get rid of these glitches, it is recommended that you reboot the wireless range extender. For this, you need to first power off the extender and unplug it from its wall socket, wait for thirty seconds to one minute, and then, connect the extender back to its wall socket. Do not forget to turn the device on. Now, see if you are able to step out of the mess that you were in. In case, you are still experiencing the same issue, then it means that there is some reason behind it. To know more about the same, continue reading.
5. Purchase a New Extender
Considering none of the above-mentioned troubleshooting tips help you to resolve the Wavlink WiFi range extender not turning on issue, it means that there is something wrong with your wireless extender itself. In this case, you should get the WiFi range extender replaced. It will get replaced if it is under warranty. In case your device is not under warranty, then you are left with no other option than to purchase a new one. Once you are done, access the WiFi Wavlink com setup wizard and install the device.
In Conclusion
This ends the guide written on how to troubleshoot the Wavlink WiFi range extender not turning on issue. We hope that now that you have walked through the information given above, you will easily be able to resolve the issue.
Which was the tip that helped you out the fastest? In case you are interested in sharing your answer with your fellow readers, do so via the comment section.