I have my Synology NAS that was working fine till now. But now it won’t power up. The LED light on it blinks continuously. What should be done now. I need to use Synology download center to get a few files. Please help.
Is the same problem troubling you too? We can help you out. Through this post, we will provide you with effective remedies that will help you power on your Synology with ease. So, shall we begin?
How to Fix Synology That Won’t Turn On?
-
Check Motherboard Status
We first want you to check the status of the motherboard. This will; help you narrow down to what’s causing you the trouble. Turn off your Synology NAS device first. Press the Power button off and unplug the power cable. Thereafter, remove any attached external device from it. Also remove installed drives from it. Now, try turning it on. Observe the LED on it. Is it blinking or is it stable?
Case 1: Synology LED Blinking
Check the power adapter of the Synology device. Is it damaged or loose? Fix the trouble right away. Also try plugging it into another wall outlet and ensure that Synology receives consistent power. You should be able to boot up Synology with adequate power supply to it.
Case 2: LED is Stable
If the LED on your Synology device is stable and you hear a beep sound within three minutes of turning it on, this implies the motherboard is working correctly. There’s something else causing the issue. Try the next hack to resolve the problem.
-
Check Drives Health
You need access the Storage Manager now. There’s no need to open Synology login page to get this job executed. Open Storage Manager and then Select HDD/SSD. Check drive health statrus. If its mentioned not Healthy then the defective drive is the reason why Synology is not working as intended. Replace the drive with another one to get the issue resolve.
-
Check External Devices Status
Now that you know that motherboard as well as internal drive is working fine. If the issue persists then you should check the external devices. The issue may be due to these devices.
Here’s what you should do now:
- Switch off your Synology NAS first by unplugging it.
- Attach any one external device to it.
- Plug it back and check the light status.
- Repeat the process with all external devices.
- In case the light blinks for more than 20 minutes, this implies the problem is with the external device.
-
Check Synology Status
If the external devices are also not responsible for the trouble, then check Synology status. You can do this with the help of Synology Assistant. You should check the Status and Description using the Status Indication Table. This will help you determine the exact reason so that you can make relevant troubleshooting.
-
Reset Synology
If nothing helps you make your Synology work then you should factory reset it. Use the Reset button on your NAS to execute the reset process. Pres it for 4 seconds or till you hear a beep. Now go to Web Assistant and open Synology NAS by double clicking the icon. Log in using the default username. The password field should be left empty. Now assign a password and follow other on-screen prompts to configure Synology again.
In the End
It is expected that after following the effective solutions listed in this post, you will have your Synology NAS working in a proper way without giving you any trouble.